KDR Output Load Reactor

Optimized Load Reactors

KDR Line Reactor

Extend the life of the motor on the Output:

  • Dampen Overshoot Peak Voltage
  • Reduce Motor Heating
  • Reduce Audible Noise
  • RoHS Compliant

Dampen Overshoot Peak Voltage

KDR Optimized Drive Reactors may be used at the output of AC-PWM variable frequency drives where the motor lead lengths are less than 100 feet. The addition of a KDR unit to the output of a drive will dampen overshoot peak voltage, reduce motor heating and audible noise, helping to extend the life of the motor.

Performance

Voltage Before KDR   Voltage After KDR
Voltage Before KDR       Voltage After KDR    

Reduce Voltage Spikes

The units will also help prevent inverter instantaneous overcurrent trips because they provide needed inductance when the load on an inverter has an abnormally high capacitance. The 100 foot guideline has been recommended because as motor leads become longer, the resonant frequency is lowered, and the magnitude and duration of the voltage spikes increases.

For lead lengths exceeding 100 feet, TCI offers V1k Output Filters and KMG MotorGuard High Performance Output Filters for long lead motor protection needs.

 

 

 

Dimensions & Ratings

UL Listed

480 Volt

575 Volt

 

UL Recognized

480 Volt

 575 Volt

 690 Volt

DIN Rail

 

 

 

 

 

 

Copyright© 2011 TCI, LLC     Tel. (414) 357-4540     Fax. (414) 357-4484     W132 N10611 Grant Drive, Germantown, WI 53022     Information may be subject to change
This site is powered by the Northwoods Titan Content Management System

FOLLOW US

 Follow us on LinkedIn  Follow us on YouTube Follow us on Google+