TCI offers a number of solutions that reduce or eliminate harmonic distortion, including line reactors, passive harmonic filters, and active harmonic filters. With proper application, these harmonic filters are used to meet the IEEE-519 specification on harmonics.

Causes of Harmonic Distortion

Non-linear loads are products that draw non-sinusoidal current from the distribution line. This non-sinusoidal current is derived from waveforms that combine the fundamental frequency with integral multiples of that frequency. The resulting harmonic distortion is a basic result of the operation of nonlinear loads. When these types of loads are a significant portion of an electrical system, harmonic distortion may begin to cause problems throughout the entire system.

Indicators of Harmonic Distortion

• Poor Power Factor
• Transformer and distribution equipment overheating
• Random breaker tripping
• Sensitive equipment failure
• Voltage unbalance

Harmonic Solutions 

KDR
	The addition of a KDR Optimized Drive Reactor will limit the inrush current to the rectifier, rounding the waveform, reducing the peak currents and lowering the harmonic current distortion. Learn more about the KDR
HG7
	The HG7 not only limits current distortion to less than 7% TDD, it also improves true power factor. Multiple package options result in the right filter configuration for the application. Learn more about the HG7
H5
	By actively monitoring the load current, the H5 determines the proper current waveform for injection into the system to maintain an acceptable level of harmonic distortion (TDD Reduction to 5% or better at Full Load). Learn more about the H5